Back to Materials Download PDF

ValidTi™

Precision Turning Stock

TECHNICAL DATA SHEET
DOC REF: TDS-ROD-GR23-V5.1 | FORM: BAR/ROD
MATERIAL GRADE Ti-6Al-4V ELI (Grade 23)
PRIMARY STANDARD ASTM F136 / ISO 5832-3
MDR COMPLIANT

Yield Strength (Rp0.2)

Essential for small-diameter implant screws & abutments.

ASTM Standard Limit 795 MPa
ValidTi™ Typical 995 MPa

>> +25% STRENGTH MARGIN

Dimensional Precision

Centerless ground for Swiss-Type lathe guide bushings.

h9 (General) h7 (Stock) h6 (Custom)
h7 Standard Stock
Tol: 0 / -0.015mm (ISO 286-2)
*Upgrade to h6 (0/-0.009mm) available on request.
✓
Perfect for Guide Bushings

Chemical Composition

Nitrogen (N)0.010 %
Carbon (C)0.010 %
Iron (Fe)0.17 %
Oxygen (O)0.12 %

Structure & Machinability

MicrostructureFine Equiaxed (A1-b)
Grain Size ASTM > 9.0
Surface Finish Polished (Ra 0.4)
*Optimized for micro-threading integrity.
Swiss-Type Turning Advisory: ValidTi rods are precision ground to h6 tolerance for jamming-free guide bushing operation. Material produces long, continuous chips; High-Pressure Coolant (HPC) is recommended for effective chip breaking.